1. When the Message "The current Paper Drawer is empty." Appears
1156O082DA
1st Drawer
Slide out the 1st Drawer.
1
When the drawer currently selected for use runs out of
paper, the message shown on the left appears. The current
copy cycle is interrupted and you cannot then start a new
copy cycle. The blinking drawer has run out of paper.
Example: The 1st Drawer has run
out of paper.
Fan the paper stack thoroughly.
Front Side
Add paper by using the following procedure.
Load the paper stack into the Drawer
so that its front side faces down.
2
Adding Paper
1149O115AA
1149O116AA
The paper should be
loaded no higher than
▼ (Max. Level
Indicator).
NOTE
Max.
1145O555KA
Slide the Drawer back in.
3
Chapter 5
When a Message Appears
102
To Next Page
Loading...
