3. When the Message "The Staple Cartridge is empty." Appears
1149O386CA
The message shown on the left appears when the
staples are running out in a copier system
equipped with a Staple Sorter.
Replace the Staple Cartridge with a new one by
following the procedure given below.
10-Bin Staple Sorter
Open the Stapler Door.
2
Lock Release Lever
Stapler Door
1139O0490A
Taking hold of the Lock Release Lever
of the Staple Sorter, slide the Staple
Sorter away from the copier.
1
While lifting the Staple Cartridge
Release Lever, pull the Staple
Cartridge out of its port.
3
Pull the staple belt about 3 cm out of
the new Staple Cartridge and break off
that portion.
4
Replacing the Staple Cartridge
1139O2190A
1139O0970A
1139O1350A
Check that no portion of the staple belt
hangs out of the cartridge. Break off
any portion of the belt that hangs out of
the cartridge.
NOTE
Chapter 5
When a Message Appears
110
To Next Page
Loading...
