The copier erases a margin of a set width along the four edges, one edge, or at the center to erase
shadows or other unwanted images. This feature is effective in erasing the communications
record on a document received by fax.
One of six different functions can be selected. Use the one that is most suited to your need.
The erase width can be selected from among 5mm, 10mm, 15mm and 20mm.
The erase width for the Top Edge is 10mm only.
For Frame Erase, the width of only the left and right edges can be varied and the erase width for
the top edge is fixed to 10mm.
Edge/Frame Erase
Functions
Erases an area of the original equivalent to a
given margin from the left edge of the copy.
Left Edge Erase
Erases an area of the original equivalent to a
given margin from the right edge of the copy.
Right Edge Erase
Frame Erase
Erases a given width along the four edges.
Top Edge Erase
Erases an area of the original equivalent to
5mm from the top edge of the copy.
Center Erase
Erases a given width down the center.
Frame + Center Erase
Erases a given width along the four edges and
down the center.
1149O053AA
1149O054AA
1149O055AA
1149O056AA
1149O057AA
1148O058AA
Chapter 3
Making Copies
7. Auxiliary Functions
74
To Next Page
Loading...
