Minolta EP5000 - Control Panel Keys and Indicators

11
4. Control Panel Keys and Indicators
1
Touch Panel
•
Shows various screens and messages.
See Touch Panel
➭
p. 18
2
Start Key
•
Press to start a copy cycle.
➭
p. 25
•
If pressed while the copier is warming
up, it enables the Auto Copy Start
Function.
➭
p. 21
3
Clear Key
Press to:
•
Reset the multi-copy entry to 1.
➭
p. 25
•
Clear a zoom ratio entered when setting
one from the 10-Key Pad.
➭
p. 38
4
Stop Key
•
Press to stop a multi-copy cycle.
➭
p. 25
5
Panel Reset Key
•
Press to set the copier into the initial
mode, clearing all settings made
previously on the control panel.
➭
p. 21
6
Interrupt Key
➭
p. 22
•
Press to interrupt a current job with a
different one.
•
Press it again to return to the previous job.
7
Energy Saver Key
•
Press to set the copier into the Energy
Saver mode.
➭
p. 21
8
Access Mode Key
•
Press to enter the access number.
➭
p. 22
9
10-Key Pad
Use to enter:
•
The number of copies to be made.
➭
p. 25
•
The zoom ratio to be used.
➭
p. 38
•
The number of originals.
Note: It does not, however, clear the
contents of the zoom and job
program memory and the settings
made immediately before the
Interrupt mode.
Note: This key becomes valid only when
Copy Track of the Administrator
mode available from User’s Choice
is set.
13 12 10
p
Rs[¯« •
1
ZxI[g
Zx
p I[g
p
x1.000
{ƒ
dª ·e Rs[
{
User Mode
Job Recall
Mode Check
Chapter 2
Getting to Know Your Copier
16