4. When the Message "A paper misfeed has been detected." Appears
1149O387CA
If a paper misfeed occurs during a
copy cycle, the message shown on the
left appears and that particular copy
cycle is stopped in the middle of
operation.
Clear the misfed sheet of paper
according to the procedure given
below.
Misfeed Location Displays
Different procedures are used to clear a misfed sheet of paper depending on the location. First,
isolate the location, then clear the misfeed according to the procedure applicable to the misfeed
occurring at that particular location.
A blinking dot "O" indicates that there is a misfeed at that location. A lit dot "O" indicates that
there might be a sheet of paper stopped at that location.
Copier ➭ p. 115
1149O252AA
Multi Bypass Tray ➭ p. 117
1149O251AA
Paper Feed Cabinet ➭ p. 118
1156O061AA
Duplex Unit ➭ p. 120
1149O254AA
Automatic/Duplexing Document
Feeder ➭ p. 122
1149O255AA
Sorter/Staple Sorter ➭ p. 124
1149O256AA
Large Capacity Cassette ➭ p.121
1156O006AA
Chapter 5
When a Message Appears
114
To Next Page
Loading...
