Duplexing Document Feeder
Remove the original stack from the
Document Feed Tray.
1
1156O014AA
1156O015AA
Swing open Document Feed Unit Door
F1 and gently pull out the original.
2
Swing open Document Turnover/Exit
Unit Door F2 and carefully pull out
the original from the Exit Unit.
3
1156O016AA
Raise the Duplexing Document Feeder.
Gently pull out the original from the
Document Turnover/Feed Unit.
5
1156O017AA
Close F1 .
6
Remove the original from the Original
Glass and lower the Duplexing
Document Feeder.
7
1156O018AA
Add the number of originals indicated
on the Touch Panel to the bottom of
the original stack removed in step 1,
and reload the stack onto the
Document Feed Tray.
8
1156O019AA
Close F2 .
4
Chapter 5
When a Message Appears
4. When the Message "A paper misfeed has been detected." Appears
122