Minolta EP5000 - Inside the Copier

Inside the Copier
1134O009AA
1
2
3
4
5
6
7
8
9
10
10
1
Toner Bottle Holder
: Swing open to replace the Toner Bottle.
2
Toner Bottle
: Contains toner. Replace it with a new one when the warning
message tells you to.
➭
p. 108
3
Original Width Scale
: Place the original along this Scale for correct positioning.
4
Original Length Scale
: Place the original along this Scale for correct positioning.
5
Original Pad
: Holds the original in position on the Original Glass.
6
Original Glass
: Place the original face down on this Glass.
7
Corona Unit Cleaning
Lever
: Operate the Lever to clean the Corona Unit if unwanted lines are
produced on the copy.
➭
p. 141
8
Dehumidifier Switch
: Do not touch this switch, it’s for the exclusive use by the
Technical Representative.
9
Transport Section
Release Lever M2
: Swing down to release the Transport Section for clearing a misfed
sheet of paper.
10
Misfeed Removal
Knobs M1 , M3
: Use to clear a misfed sheet of paper.
➭
p. 115
Chapter 2
Getting to Know Your Copier
3. Copier Parts and Accessories
11