2. Zoom Memory Input
Up to two different, frequently used zoom ratios can be stored in memory so you can use them
later whenever necessary. For the Minimal ratio, X0.930 has been factory-set, but that can be
changed as necessary.
Press the User Mode Key.
1
Touch
Zoom Memory Input
.
2
1156O088DA
Storing a Zoom Ratio
Using the 10-Key Pad, enter the
desired zoom ratio.
3
Touch the desired number key in
which you want to store the zoom
ratio, either
1
or
2
.
4
1149O365CA
1149O227AB
Touch
Exit
.
The Basic screen reappears.
5
•
The zoom ratio can range from ×0.500
to ×2.000.
•
The Minimal ratio can range between
×0.900 and ×0.999.
NOTES
User Mode
1134P356CA
For example, enter X1.234, as
1
,
2
,
3
, and
4
, in that order. To correct
an entry, press the Clear key, then
enter the new ratio.
•
When a new zoom ratio is stored in a
key number, the old one stored in that
key number is lost.
•
The custom zoom ratios may also be
stored using the screen accessed by the
User Set
key which is shown when
Zoom is touched on the Basic screen.
Storing a Ratio in Memory ➭ p. 39
NOTES
1149O365CA
Chapter 4
Using the User Mode
82
To Next Page
Loading...
