Place the original with its stapling position at the upper right corner as shown below.
Note the correct direction of the originals if the copies are to be stapled either in Sort Staple or
Manual Staple Mode.
Instructions for Loading Originals for the Finishing Functions
Using the Automatic/Duplexing Document Feeder
Load the originals crosswise in the document feeder. Ensure also that the stapling position is located
as shown below.
Correct:
1151O024AB
Copies
Originals loaded crosswise
Stapling Position
Placing the Original on the Glass
Correct:
1039O2230A
Stapling Position
*
Use Manual Staple to staple copies after they have been made.
Chapter 3
Making Copies
6. Finishing Mode
54
To Next Page
Loading...
