Touch the desired finishing function
key.
1
Selecting the Finishing Function
Sort / Group / Sort-and-Staple
•
The capacity of each Sorter Bin is as
follows
Non-Sort
Sort, Group, Sort Staple
•
When making copies in the Sort Staple
Mode, make sure to load the originals
into the Document Feeder in the
correct direction.
•
Thick paper, translucent paper, and
OHP transparencies cannot be used for
making copies in Sort, Group, or Sort
Staple.
NOTES
Type of Paper Capacity
Plain and recycled
paper
20 Bin
Up to 100 sheets
10 Bin
Up to 50 sheets
Special paper (thick
paper, translucent
paper, OHP
transparencies)
Up to 10 sheets
Bin Capacity
10-Bin Sorter, Staple
Sorter (1st to 10th Bin)
Up to 25 sheets
20-Bin Sorter, Staple
Sorter (1st to 20th Bin)
Up to 50 sheets
(Letter or
smaller)
◆Removing Copies from the Sorter
After the Sort, Group, or Sort Staple
mode is finished, the bins will shift
upward in position. When all movemet
has ceased, then remove your copy sets
or stacks from the bins. Once your
copies are removed, the bins will shift
downward in preparation for the next
storing job.
1149O274DA
Chapter 3
Making Copies
6. Finishing Mode
50
To Next Page
Loading...
