2. Care of the Copier
1
2
1
3
Corona Units
2
Document Transport Belt
3
4
Gently slide out the Upper Corona
Unit Cleaning Lever as far as it goes.
Gently slide the Cleaning Lever back
into the original position.
Gently slide out the Lower Corona
Unit Cleaning Lever as far as it goes.
Gently slide the Cleaning Lever back
into the original position.
Repeat steps 1 to 4 two to three times.
Wipe the surface of the Document
Transport Belt clean with a soft cloth
dampened with mild home detergent.
Hold the Document Transport Belt at
both edges and pull it to the left to
expose a fresh surface.
Wipe the fresh surface clean with a
soft cloth dampened with mild home
detergent.
Repeat these steps until the entire
surface of the Belt is wiped clean.
1136O073AA
1136O074AA
1136O075AA
1136O076AA
1139O1910A
1151O1920A
Chapter 7
Miscellaneous
141
To Next Page
Loading...
