Using the Single Automatic Document Feeding Mode (SADF Mode)
This is the mode in which you load your originals one by one onto the Automatic/Duplexing
Document Feeder to make a copy or copies from it. When you load the original, the copier
automatically starts the copy cycle.
1151O018AA
1151O019AA
Make sure that the Start Key is lit
green and place the original face down
on the Document Feed Table.
2
The original is automatically taken up
and the copy cycle is started.
3
Making sure that the Start Key lights
up green again, load the next original.
4
Open the Single Feed Tray and slide
the Guide Plate to the size of the
original.
1
•
Originals available for the SADF Mode.
Type : Plain paper
Thickness : 35 g/m
2
to 200 m/g
2
Size : A3L to A5L
•
The following features cannot be selected in the SADF Mode.
2-sided original 1-sided copy
2-sided original 2-sided copy
Dual Original Scanning Mode (2 in 1 Mode)
Cover Mode, Separation Mode, Manual Staple
▼ ▼
NOTES
•
Be sure to place one original at a time.
•
Be sure to correct any fold or curl in
the original.
NOTES
Chapter 3
Making Copies
2. Placing Originals
28
To Next Page
Loading...
