9. Safety system
MiR250 User Guide (en) 07/2020 - v.1.2 ©Copyright 2020: Mobile Industrial Robots A/S. 99
Status lights
The LED light band running all the way around the robot indicates the robot’s current
operational state. Colors may also be used as part of missions, but as standard, the robot is
delivered with the following setup.
NOTICE
When the robot's battery reaches a critically low level of power (0-1%), the
ends of the status lights flash red.
Signal lights
Signal lights are used to indicate the robot’s immediate motion plans by signaling forwards-
backwards-braking and left-right turns.
The signal lights work similarly to lights used on cars; white at the front, red at the back, and
indicating a left or right turn by blinking.
To Next Page
