61
Front Panel Menu Operation
• Opt - Output circuit
• IZ - Input zone
• OZ - Output zone
• IT - Custom Interval
• TM - Custom Timer
• ST - Common System Status
• NS - Local Node Status
• CS - CPU Status of all the displays in the system
Circuit Number – The number assigned to each status, switch, timer, interval, zone or input.
For example, an AP photo detector on node 2, CPU 1, Loop 3 with the address S104.1 in the
Configurator has this ID on the display: 02-01-03IN-S104.001
A double asterisk (**) appears if there is no applicable value for certain components. For
example, an input zone has an ID like 01-**-**IZ-0001 because it has no CPU number or Loop
number.
To Next Page
Loading...