20
5.0 Front Panel Menu Operation
5.1 1. Reports Menu
Use the Reports Menu to print the Alarm Log, Event Log, Current Levels, Sensitivity Levels,
Verification Counts, Maintenance Report, Obscuration, CO Report, Serial Code, Power
Source, and Output Active. You can view on screen, or print directly to a printer connected to
the panel, or to your laptop computer.
To enter the Reports Menu, you must be in the Command Menu. To enter the Command
Menu, press when the display is in normal mode.
Note: To print a report to a printer or to a laptop (using HyperTerminal), the printer
output must be enabled in the Configurator.
Step 1: Select the reports menu
1. Use and to scroll the cursor to
“Reports”.
2. Press to select the Reports Menu.
Step 2: Enter your passcode (if required)
Enter your passcode. See page 16 for instructions on
entering passcodes.
- Command Menu -
1 Reports
2 Bypass
3 Manual Control
4 Input Simul.
5 Walktest
6 Day/night mode
7 Set Time
8 Clear Event Log
9 Clr Verif Count
10 Network Restart
11 Configuration
12 Sig Sil Inh Tmr
Enter passcode for
level 1 or higher:
To Next Page
Loading...
Need help?
General