Mircom FX-2000 series User Manual

10
System Components
3.4 Flush Trim Ring
The following table describes the flush trim ring used with the FX-2000.
3.5 Remote Annunciators
The following table describes the remote annunciators used with the FX-2000.
Table 5 FX-2000 Flush Trim Ring
Model Description
FA-XT-TRB
Black flush trim ring for BBX-1024XT and
BBX-1024XTR.
Table 6 FX-2000 Remote Annunciators
Model
Description
RA-1000
Series
Remote multiplex annunciator panels. For Canada,
ULC-S527 Standard requires a Common Alarm,
Common Supervisory, and a Common Ground Fault
LED indicator on the Remote Annunciators. To meet
this requirement, use the FX-2000 Configurator to
correlate one LED for Common Alarm, one LED for
Common Supervisory and one LED for Common
Ground Fault.
RAM-208/216
Remote multiplex annunciator panels. For Canada,
ULC-S527 Standard requires a Common Alarm,
Common Supervisory, and a Common Ground Fault
LED indicator on the Remote Annunciators. To meet
this requirement, use the FX-2000 Configurator to
correlate one LED for Common Alarm, one LED for
Common Supervisory and one LED for Common
Ground Fault.

Mircom FX-2000 series Specifications

General

Type	Fire Alarm Control Panel
Display	LCD
Network	Optional
Communication	RS-232, RS-485
Programming	Via keypad or PC
SLC Loops	1
NAC Outputs	4
Communication (Additional)	Optional Ethernet
Input Voltage	120 VAC or 240 VAC, 50/60 Hz
Battery Charging Current	1.5 A
Auxiliary Power Output	24 VDC
Operating Temperature	0°C to 49°C (32°F to 120°F)
Relative Humidity	Up to 93% non-condensing