Mircom FX-2000 series User Manual

84
Appendix A: Specifications
12.5 Compliance
UDACT-300A Digital Communicator Module Transmit alarm, supervisory, and trouble to a
central monitoring station.
Current Consumption standby: 45 mA / alarm: 120 mA
System Model FX-2000 Series Fire Alarm Control Panel
System Type Local, auxiliary (using PR-300), remote protected premise station (using PR-300
or UDACT-300A), central station protected premises (using UDACT-300A).
Type of Service A, M, WF, SS (with PR-300 or UDACT-300A)
Type of Signalling Coded and Non-coded
Applicable Standards NFPA 70 and 72, UL-864 Rev.9, ULC S-524, ULC S-527-99
Installation Intended for indoor use, dry locations
Table 24 FX-2000 System Modules and Annunciator Specifications (Continued)
FX-2000 System Modules and Annunciators

Mircom FX-2000 series Specifications

General

Type	Fire Alarm Control Panel
Display	LCD
Network	Optional
Communication	RS-232, RS-485
Programming	Via keypad or PC
SLC Loops	1
NAC Outputs	4
Communication (Additional)	Optional Ethernet
Input Voltage	120 VAC or 240 VAC, 50/60 Hz
Battery Charging Current	1.5 A
Auxiliary Power Output	24 VDC
Operating Temperature	0°C to 49°C (32°F to 120°F)
Relative Humidity	Up to 93% non-condensing