Mircom TX3-TOUCH-F15-B - Figure 110 Default Jumper Settings on MD-1346

116 TX3 Touch Screen Installation Manual
Touch Screen Factory Wiring
4.1.3 Default Jumper Settings on the MD-1346 PC Board in Models
Ending in -D
Figure 110. Default jumper settings on MD-1346
Pin 1
Pin 2
Pin 3
JP20
Pins 2 and 3 connected
Pin 3 Pin 2 Pin 1
JP21
Pins 1 and 2 connected
Pin 1
Pin 2
Pin 3
JP17
Pins 2 and 3 connected
JP1
JP3
Pins 1 and 2 connected
Pin 1
Pin 2
Pin 3
Pin 3
Pin 2
Pin 1
JP4
Pins 2 and 3 connected
JP8 and JP9
No pins connected
MD-1346