EasyManua.ls Logo

Mircom TX3-TOUCH-F15-B - Installing the P1264 IP Camera; Figure 82 Position of the Camera on the Inside Door

Mircom TX3-TOUCH-F15-B
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
96 TX3 Touch Screen Installation Manual
Touch Screen System and Setup
3.16 Installing the P1264 IP camera
You can install a P1264 IP camera in the following models:
TX3-TOUCH-S22(-C/D)
TX3-TOUCH-F22(-C/D)
TX3-TOUCH-S15-B/C/D
TX3-TOUCH-F15-B/C/D
TX3-TOUCH-S15B-WR
TX3-TOUCH-S15S-WR
To install the IP camera
1. Shut down the Touch Screen and disconnect the power.
2. Open the Touch Screen door.
The IP camera is installed in the top center of the door, as shown in Figure
82.
Figure 82. Position of the camera on the inside door
3. Unscrew the 2 nuts and remove the camera bracket.
Bracket for
IP camera

Table of Contents

Related product manuals