22 TX3 Touch Screen Installation Manual
Installation
Figure 5. TX3-TOUCH-S15-A surface mount front dimensions
(inches)
Warning: To prevent overheating, do not install any of the TX3 Touch
Screens in direct sunlight.
The surface mount enclosure mounts on the wall. Mount the enclosure right-side
up (the Mircom logo on the door is on the bottom).
You need:
• 6 fasteners appropriate for the wall that you are mounting the enclosure
on.
26.200 26.200
19.000 19.000
3.622 3.622
0.120 0.120
To Next Page
Loading...
