152 TX3 Touch Screen Installation Manual
Resident Operating Instructions
7.2 ADC Resident Operating Instructions
Mircom's state-of-the-art Touch Screen door entry system provides you and your
guest with an increased level of confidence and security.
Touch Screen operates with your existing telephone. Your guest dials your code
number or selects your name by scrolling through the visual directory on the
Touch Screen unit, causing your telephone to ring.
Note: The telephone keypad numbers described in this chapter may be
different for your system. If the keypad numbers do not perform as
described, check with your building administrator to get the correct
values.
7.2.1 Granting Access
When you answer your telephone, you will be in communication with your
guest.
To unlock the main door
• Press 9 on your telephone keypad. If your unit is assigned a specific code
for the main door then enter this code followed by the pound (#) key.
To unlock the auxiliary door
• Press 6 on your telephone keypad. If your unit is assigned a specific code
for the auxiliary door then enter this code followed by the pound (#) key.
To refuse entry
• Hang up or
• Press 4. If your unit uses a code for door entry, press 4 followed by the
pound (#) key.
7.2.2 Keyless Entry Codes
The keyless code is a confidential number assigned to each resident by the
building administrator to let you open the front lobby door without using a key.
To unlock the front door
1. Press 0. The keyless code prompt appears.
2. Enter the keyless code. The front door unlocks.
To Next Page
Loading...
