90 TX3 Touch Screen Installation Manual
Touch Screen System and Setup
3.9 Turning the Touch Screen On and Off
Note: Never turn off power when the system is operational.
To shut down the Touch Screen
1. Press the On/Off switch.
On TX3-TOUCH-K15-A, TX3-TOUCH-F15-A, and
TX3-TOUCH-S15-A the On/Off switch is on the outside of the door
(Figure 64).
On all other models, the On/Off switch is at the bottom of the inner chassis.
Figure 79. On/Off switch
2. After the TX3 Configurator and Windows have finished shutting down,
unplug the power supply.
Attention: Do not disconnect the power until the full shut down process has
been completed.
To turn on the Touch Screen
1. Press the On/Off switch.
On/Off Switch
To Next Page
Loading...
