Mircom TX3-TOUCH-F15-B - Page 142

142 TX3 Touch Screen Installation Manual
Touch Screen Factory Wiring
4.4.1 Default Jumper Settings on the PC Board in TX3-TOUCH-S15B-WR
and TX3-TOUCH-S15S-WR
Figure 153. Default jumper settings on MD-1288 for
TX3-TOUCH-S15B-WR and TX3-TOUCH-S15S-WR
Pin 1
Pin 2
Pin 3
JP20
Pins 2 and 3 connected
Pin 3 Pin 2 Pin 1
JP21
Pins 1 and 2 connected
Pin 1
Pin 2
Pin 3
JP17
Pins 2 and 3 connected
JP2
No pins connected
JP1
JP3
Pins 1 and 2 connected
Pin 1
Pin 2
Pin 3
Pin 3
Pin 2
Pin 1
JP4
Pins 2 and 3 connected
JP8 and JP9
No pins connected
MD-1288