132
LCD PC E
LCD PC E
-
-
8590 MAINTENANCE
8590 MAINTENANCE
5. Disconnect the power wire from hard disk drive. (Figure 2-39)
Figure 2-39 Remove two screws and one
disconnect one cable
Reassembly
1. Reconnect the power wire to HDD and data cable.
2. Replace the HDD and secure with two screws
3. Fit the plate back to base housing with the door.
4. Fit the power & HDD’s compartment cover and secure with three screws.
5. Replace the housing shielding and CPU cover. (See step 3, 4 of section 2.2.2 reassembly).
To Next Page
Loading...