MiTAC E-8590 - Led Indicators

79
LCD PC E
LCD PC E
-
-
8590 MAINTENANCE
8590 MAINTENANCE
1.4.2.2 ACPI Mode
• At ACPI mode, power button behavior was set by windows power management control panel.
• You could set “standby” or “power off” to power button function.
• Continue pushing power button over 4 seconds will force system off at ACPI mode.
• There is no sleep button on this machine.
1.4.3 Keyboard Switch
System automatically provides a Keyboard cover state through PS2 to relative application when user closes the
Keyboard cover.
1.4.4 LED Indicators
System has six status LED indicators to display system activity, which include three at LCD panel side, three
above keyboard.