MiTAC E-8590 - Modem Card

115
LCD PC E
LCD PC E
-
-
8590 MAINTENANCE
8590 MAINTENANCE
2.2.5 Modem Card
Disassembly
1. Remove the CPU cover and housing shielding. (See the step 1, 2 of section 2.2.2 disassembly)
2. Remove the TV tuner board. (See section 2.2.3 disassembly)
3. Remove two screws fastening on the modem board. (Figure 2-14)
4. Disconnect the modem card’s wire. Then remove it. (Figure 2-14)
Figure 2-14 Remove the modem card
Reassembly
1. Fit the modem card on the system board and secure with two screws.
2. Reconnect the the modem card’s wire.
3. Replace the TV tuner board. (See section 2.2.4 reassembly)
4. Replace the housing shielding and CPU cover. (See the step 4, 3 of section 2.2.2 reassembly)