Mitel 5340 - Page 34

Mitel IP Phone User Reference Guide Release 4.1
32
When you finish dialing, the number the call will be placed.
Calling: Robin Jones
END
If you place an internal call, your LCD displays the extension and name of
the connected party once the call is answered. If you place an external call,
the LCD displays the name of the connected party, or if the name is
unknown, the phone number.
320: Robin Jones
TRANS CONF END
3. To end the call, choose one of the following:
• Press the END softkey.
• Replace the handset.
NOTE: To use the speakerphone for step 1, press an available Line
Appearance key or the
key instead of lifting the handset.
4. To end a call before you have completed dialing, choose one of the following:
• Replace the handset if using the handset.
• Select the
key if using the speakerphone.
• Press the End softkey.
Making a second call on the 5224/5324 phone
To make a second call, while on an active call, follow these steps:
1. Press any available Line Appearance key. This puts the active call on hold,
and provides dial tone for a second call.
2. To make an internal call, dial the extension. To make an external call, dial the
prefix required for external dialing (usually “9”) followed by the number you
want to call.
320
3. When you finish dialing the number, the call will be placed.
Calling: Robin Jones
END
4. If you place an internal call, your LCD screen displays the extension and
name of the connected party once the call is answered. If you place an