Mitel 5340 - Answering a Call on the 5224;5324 Phone

Mitel IP Phone User Reference Guide Release 4.1
29
5. Wait for the phone to display the following (this may take 30 seconds or
more):
Logged Out
ACTIVATE
6. Press the ACTIVATE softkey.
The display will show:
Extension:
QUIT
7. Enter your extension.
8. If you have login/logout privileges, the display will show:
PIN:
ENTER QUIT
Enter your PIN, then press the ENTER softkey.
9. If you do not have login/logout privileges, the display will show
Extension: 314
YES NO
Press the YES softkey.
10. The display will show
:
Extension: 314
REDIAL CALLS MENU
You have now successfully activated the phone, and can make calls.
See “Quick Set Up” on page 100 for information about initial settings you should
configure through the web interface.
Answering a call on the 5224/5324 phone
When an incoming call is received on a phone, several things happen: (1) the
phone rings, (2) a Line Appearance flashes, and (3) the LCD displays the phone
number of the caller and, if known, the name of the caller.
You can answer an incoming call by picking up the handset, pressing the flashing
Line Appearance key, pressing the ANSWER softkey, or by pressing the
key.
321: Robin Jones