EasyManua.ls Logo

Mitel 5340 - Page 85

Mitel 5340
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mitel IP Phone User Reference Guide Release 4.1
83
NOTE: * beside the position of the call means that the call was not answered.
NOTE: If the call was answered by a member of your call pickup group, then the
call will show as unanswered (with a *) on your phone and answered (without
a *) on the call pickup group member's phone that answered the call.
Redial on the 5304 phone
You must program a Redial List/Dial memory key to be able to use this feature.
See “Program memory keys” on page 104.
Using the Redial List/Dial key, you can view a list of calls that were made and
also redial a number in that list without using the keypad. The maximum amount
of numbers in your redial list is typically ten but is dependant on Broadview
Networks.
To use Redial, follow these steps:
1. Press the Redial List/Dial key.
The number that you most recently dialed is displayed.
*1: 9-605-223-7865
2. Use the arrow/scroll keys to navigate the list (if required).
3. Once the required number is displayed, press the Redial List/Dial key to
make the call. If you are on-hook, the next available Line Appearance is
selected and the speakerphone is activated. You will hear ringing once the
number has been dialed.
NOTE: * means that the call was not answered.
NOTE: The position of the call in the call list is displayed in front of the phone
number.
NOTE: Lift and replace the handset to exit from the call list.
Call pickup on the 5304 phone
Using the call pickup feature, you can answer incoming calls for other members
of your call pickup group.
To use this feature, you must be a member of a call pickup group and have a
memory key programmed as Pickup. See “Program memory keys“ on page
104.
When a call comes into any member of your call pickup group, their phone will
ring. To answer the call, follow these steps:
1. Lift the handset.
2. Press the Pickup key.
You can also join and leave your pickup group with a Join/Leave group key or via
the web interface. When you leave the group, this disables other group
members from picking up your calls; however, you can still pickup other

Table of Contents

Other manuals for Mitel 5340

Related product manuals