Mitel 6869 SIP - Page 38

38 Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Phoning
Selecting from the call list
You want to call a user from one of the three call lists. You can choose
from the following call lists:
Your phone automatically stores the person's phone number and name in
a call list in the MiVoice Office 400 communication system. Within the one
number user concept (see chapter "One number user concept", page 8
)
you can call back users through one of these call lists. An individual call list
contains a maximum of 30 entries. More information on call lists can be
found in chapter "Editing options for the call list", page 72
.
The call lists can be operated through the call list key, the redial key, the
system menu, or a function key (see chapter "Configuring keys", page 97).
Directory lookup with quickdial: In the Quickdial field, enter the first few let-
ters of the name you are looking for using the corresponding digits.
Directory lookup with dialing by name: In the Dial by name field, enter the
first few letters of the name you want.
Press the Lookup softkey.
➔Names list (or List empty, if the phone is unable to find a matching user) is dis-
played.
Scroll through the list and select the user you want.
Pick up the handset.
➔The phone number displayed is dialed.
Menu Description
Unanswered calls List of callers who tried to reach you when you were
absent. The number of missed calls are signaled on the
display ( ); the LED on the call list key is red.
Note:
If your system administrator selected the call list display
type Picture ID (see chapter "Editing options for the call
list", page 72), the LED lights up when you press the call
list key.
Answered calls List of calls answered.
Redial list List of calls made.