Mitel 6869 SIP - Page 58

58 Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Phoning
Locking/Unlocking your phone
You need to leave your desk and want to ensure that no-one can alter your
phone's settings, look at your private data, or make calls from your phone.
You can lock your phone with a 2 to 10-digit PIN (for more information on
the PIN, see chapter "Changing the PIN", page 90
).
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 99).
Acknowledging an appointment call
You can set a call to remind you about an appointment, for example.
Appointment call is displayed as soon as an appointment call is received.
Without acknowledgement, the appointment call will ring for 1 minute.
The following options are available: You have to enter or change the time
in the Self Service Portal.
Activating/deactivating ring alone
Press the function key for Ring Alone on/off.
➔Function is activated/deactivated, LED on the function key is switched on/off.
Activating the phone lock:
Press the function key for Phone lock on/off.
➔The phone is locked and can only be unlocked using your PIN. is displayed
in the status line.
Deactivate the phone lock:
1. Press the function key for Phone lock on/off.
2. Enter the PIN and confirm with the Enter softkey.
3. Confirm the security prompt with the Yes softkey.
Note: Use the following function codes (see also Features Overview Mitel
415/430/470 user guide on the Mitel DocFinder
), to activate or deactivate the
phone lock for all phones within the one number user concept (see "One num-
ber user concept", page 8):
• Activating the phone lock: Enter the function code *33* <PIN> #
• Deactivate the phone lock: Enter the function code #33* <PIN> #