26
C
USTOMIZING YOUR PHONE PHONE OPTIONS VIA MITEL WEB UI
3. You can logout of the Mitel Web UI at any time by clicking Log Off.
The following categories display in the side menu of the Mitel Web UI: Status, Operation, and Basic
Settings.
Category Description
Status The Status section displays the following information for the IP phone:
• Network status
• MAC address
• Hardware and firmware information
• SIP Account information
• License status
The information in the Status window is read-only.
Operation User Password - Allows you to change the user password.
Phone Lock - Allows you to assign an emergency dial plan to the
phone, lock the phone to prevent any changes to the phone and to
prevent use of the phone, as well as reset the user password.
Softkeys and XML- Allows you to configure up to 6 left softkeys and 4
bottom softkeys with functions identified.
Available functions for softkeys are listed in the table Softkey list
provided in Configuring Softkeys topic.
Keypad Speed Dial- Allows you to assign a speed dial number to a
specific digit on the phone’s keypad/dialpad for speed dialing purposes.
Expansion Module - Allows you to configure an additional 16 softkeys
with an M680i Expansion Module or an additional 84 softkeys with an
M685i Expansion Module if it is attached to the phone. This option
displays on the side menu of the Mitel Web UI only if an Expansion
Module is attached.
Directory - Allows you to copy the Received Callers List and Local
Directory from your IP phone to your PC.
Reset - Allows you to restart the IP phone when required.
To Next Page
Loading...
