Phoning
Mitel 6940 SIP 57
eud-1765/2.0 – R6.0 – 06.2018
Logging off a free seating phone:
To free up a phone, you need to log off again. To ensure a phone is not
blocked for other users if you forget to log off, your system administrator
can set up a log off process with an automatic time limit:
• After certain time after log in (e.g. six hours and 30 minutes).
• At a certain time (e.g. 6:30 p.m.)
Notes: • If no user is currently logged in a free seating phone, possibly only
emergency calls are allowed.
• As long as you do not have your own phone or are not logged on to a
Free Seating phone, your caller will obtain either the busy signal or be
forwarded to a preconfigured destination, depending on the system
configuration.
• The call list display type Picture ID (see chapter "Editing options for the
call list", page 69) is not available for free seating phones.
Hotline
The hotline is typically used for lift phones, emergency phones, or for baby
alarms or hotline in the hospitality/hotel branch.
Log in free seating:
Press the Free Seating: Log in/out softkey.
Enter phone number and PIN and confirm with the OK softkey.
➔You are now logged in and can use the free seating phone with your personal
settings.
Note: The default PIN setting ‘0000’ is not accepted (for more information on the PIN,
see chapter "Changing the PIN", page 94
).
Log out free seating:
1. Press the Free Seating: Log in/out softkey.
➔The display with the call number is displayed.
2. Depending on the system configuration, enter the PIN and confirm with the
OK softkey.
➔You are now logged off; the free seating phone is now available again to
other users.
Note: You are automatically logged off if your system administrator has set up an auto-
matic log off process.
To Next Page
Loading...
