This guide explains how to install and configure the
InnLine IP voice messaging system. The manual
consists of the three chapters shown at left.
Turn to Chapter 1 to begin installing the hardware
and configuring the software. This guide contains all
you need to know to complete a typical installation.
After installing the hardware, you configure the
software for the installation site. InnLine IP is easy to
modify for your own needs. Chapter 2 explains what
you can do:
• Add mailboxes, either one at a time or in groups
• Add and configure Automated Attendants
• Customize certain system prompts
• Configure automated guest services (AGS) menus
Note: Changes to an InnLine IP system should only
be attempted by qualified personnel.
Connected Guests believes in quality systems and
installations. We offer several certification options
to distributors, which help them benefit from the
features of InnLine IP and make each installation as
robust as possible. Please contact your Regional Sales
representative for information on this training.
To Next Page
Loading...
Need help?
General