Mitsubishi Electric Melsec A Series - 3.4 Switch Settings Comparisons

I
•
4. A2CCPU
-------------------- MELSEC-A
No.
Name Function
(3)
Cover 1
A2C CPU cover
I
• The cover protecting the A2CCPUP21/R21 PCBs, EP-ROM, battery, etc.
•
Open the cover 1 to carry out following operations:
• Installing and removing an EP-ROM.
• Setting for used memory (IC-RAM/EP-ROM)
• Connecting battery connector
• Changing battery
(4) Cover 2
RS-422 connector cover
I
The cover for the RS-422 connector used to connect a peripheral device to the
A2C.
(5) Terminal block
Terminal block for connecting external devices to the A2C
I
• The terminals used to connect the following devices:
.100/200 VAC power supply
• I/O modules and remote terminal modules
• Grounding cable
• Changing tap configuration meeting available
input voltages
(6)
Connector Fiber-optic cable connector
I
1
• Connect the cable as illustrated below.
It=
Cff?
=rr
'T
'<,
IN
OUT
Forward Forward
loop send loop send
Reverse
Reverse
Master station
Station 1
Station 2
loop receive
loop receive
(equipment
No.1)
(equipment No.2)
(7)
Connector Coaxial cable connector
I
• Connect the cable as illustrated below.
r-;
~
IN
OUT
IN
~1,
IN
F·RD
F-RD
F-RD
OUT
J
"'
1 R·RO
R·RO
IN OUT
IN
I
R·SO F·SO 1
IN I
OUT 1 OUT 1
IN·R·SO
OUT·R-RO
R-SO
F-SO
R-SO
F·SO
Reverse Reverse
loop
loop
receive send
IN-F·RO
OUT·F-SD
Forward
Forward
loop loop
send
receive
Master station
Station 1
Station 2
(equipment
No.1)
(equipment No.2)
4-87