Mitsubishi Electric MELSEC-FX3S Series - Connectable Plcs and Version Number; Compatible Programming Tool Version Number

D-6
1 Outline
1.3 Connectable PLCs and Version Number
FX 3S /FX 3G /FX 3GC /FX 3U /FX 3UC PLC User's Manual - Analog Control Edition
FX3G-2AD-BD (2-channel Analog Input)
1.3 Connectable PLCs and Version Number
The 2AD-BD is compatible with the following PLC.
1. Version check
The PLC version can be checked by reading the last three digits of device D8001 or D8101.
→ For a detailed description of the version check,
refer to A. Common Items Subsection 5.1.2.
2. How to check the manufacturer's serial number
The year and month of production of the product can be checked on the nameplate, and on the front of the
product.
→ For a detailed description of how to check the manufacturer's serial number,
refer to A. Common Items Subsection 5.1.1.
1.4 Compatible Programming Tool Version Number
The following programming tools and versions are applicable for the FX3S/FX3G series.
1. English versions
2. Japanese versions
Point
• It is possible to create programs in FX
3S PLC using programming tools of inapplicable versions by
selecting "FX
3G" as the alternative model. However, memory capacity setting of the PLC parameter must
be set to 4000 steps or less.
Compatible PLC Version number Date of production
FX
3S Series PLC Ver. 1.00 or later After March 2013 (From first product)
FX
3G Series PLC Ver. 1.10 or later After October 2008
Model name Media model name Applicable version Remarks
FX3S PLC
GX Works2 SWDNC-GXW2-E Ver. 1.492N or later -
FX-30P Ver. 1.50 or later -
FX3G PLC
GX Works2 SWDNC-GXW2-E Ver. 1.08J or later
-GX Developer SWD5C-GPPW-E Ver. 8.72A or later
FX-30P Ver. 1.00 or later
Model name Media model name Applicable version Remarks
FX3S PLC
GX Works2 SWDNC-GXW2-J Ver. 1.492N or later
-
FX-30P Ver. 1.50 or later
FX3G PLC
GX Works2 SWDNC-GXW2-J Ver. 1.07H or later
-GX Developer SWD5C-GPPW-J Ver. 8.72A or later
FX-30P Ver. 1.00 or later