Mitsubishi Electric MELSEC-FX3S Series - Outline

G-3
1 Outline
1.1 Outline of Functions
FX 3S /FX 3G /FX 3GC /FX 3U /FX 3UC PLC User's Manual - Analog Control Edition
FX3G-1DA-BD (1-channel Analog Output)
A
Common Items
B
FX
3U
-4AD
FX
3UC
-4AD
C
FX
3U
-4AD-ADP
D
FX
3G
-2AD-BD
E
FX
3U
-4DA
F
FX
3U
-4DA-ADP
G
FX
3G
-1DA-BD
H
FX
3U
-3A-ADP
I
FX
3U
-4AD-PT
-ADP
J
FX
3U
-4AD-PTW
-ADP
1. Outline
This chapter outlines the FX3G-1DA-BD (referred to as 1DA-BD).
1.1 Outline of Functions
The FX3G-1DA-BD is an analog expansion board. Which is connectable with the FX3S/FX3G Series PLC to
output the voltage/current data for up to 1 channel.
1) Only 1 1DA-BD unit can be connected to the FX
3S Series PLC.
Up to 2 1DA-BD units can be connected to the FX
3G Series PLC (40-point and 60-point type).
Only 1 1DA-BD unit can be connected to the FX
3G Series PLC (14-point and 24-point type).
(Including other analog expansion boards, analog special adapters).
2) Either "voltage output" or "current output" can be specified.
3) The D/A conversion results will be automatically output as the values to the special data register of the
FX
3S/FX3G Series PLC.
•FX
3S Series PLC
Number of connectable
units

For a detailed
description of wiring,
refer to Chapter 3.

To check the connectable
PLC model number, refer
to Section 1.3.
Point and section to be
referred to
System

Special devices

For a detailed description
of special devices, refer to
Chapter 4.
For a detailed description
of a basic program, refer to
Section 4.8.
Analog data
M/D8260 to M/D8269
For FX3S Series PLC
FX
3S Series PLC
Inverter, etc.
Contents
Output mode
switching
Output setting data
Error status
Transfer direction
Only 1
Connected to the option connector
including other analog expansion
boards, analog special adapters.