Mitsubishi Electric MELSEC-FX3S Series - Page 33

A-7
2 Description of Analog Products
2.1 Types of Analog Products
A
Common Items
B
FX
3U
-4AD
FX
3UC
-4AD
C
FX
3U
-4AD-ADP
D
FX
3G
-2AD-BD
E
FX
3U
-4DA
F
FX
3U
-4DA-ADP
G
FX
3G
-1DA-BD
H
FX
3U
-3A-ADP
I
FX
3U
-4AD-PT
-ADP
J
FX
3U
-4AD-PTW
-ADP
FX 3S /FX 3G /FX 3GC /FX 3U /FX 3UC PLC User's Manual - Analog Control Edition
Common Items
3. FX3GC Series PLC
• Connect the special adapter(s) to the left side of the FX3GC Series PLC.
• Up to 2 analog special adapters can be connected.
→ For a detailed description of the system configuration,
refer to the FX
3GC Series User’s Manual - Hardware Edition.
4. FX3U Series PLC
• Connect the special adapter(s) to the left side of the FX3U Series PLC.
• An expansion board is needed to connect the special adapter(s).
• Up to 4 analog special adapters can be connected.
• When using the high-speed input/output special adapter(s), be sure to connect the high-speed input/output
special adapter(s) first, and then connect the analog special adapter(s).
→ For a detailed description of the system configuration,
refer to the FX
3U Series User’s Manual - Hardware Edition.
5. FX3UC (D, DS, DSS) Series PLC
• Connect the special adapter(s) to the left side of the FX3UC (D, DS, DSS) Series PLC.
• Up to 4 analog special adapters can be connected.
→ For a detailed description of the system configuration,
refer to the FX
3UC Series User’s Manual - Hardware Edition.
Analog
special adapters
PLC
Up to 2 analog adapters can be connected.
FX3U-***-BD
Up to 4 analog adapters can be connected.
PLC
"***" represents "422", "232",
"485", "8AV", "CNV", or "USB."
Analog
special adapters
Expansion board
High-speed
input/output
special adapters
Up to 4 analog adapters can be connected.
PLC
Analog
special adapters