H-6
1 Outline
1.4 Compatible Programming Tool Version Number
FX
3S
/FX
3G
/FX
3GC
/FX
3U
/FX
3UC
PLC User's Manual - Analog Control Edition
FX
3U
-3A-ADP (2-channel Analog Input, 1-channel Analog Output)
1.4 Compatible Programming Tool Version Number
The following programming tools and versions are applicable for the FX3S/FX3G/FX3GC/FX3U/FX3UC series
1. English versions
2. Japanese versions
Point
• It is possible to create programs in FX
3GC PLC using programming tools of inapplicable versions by
selecting "FX
3G" as the alternative model.
• It is possible to create programs in FX
3S PLC using programming tools of inapplicable versions by
selecting "FX
3G" as the alternative model. However, memory capacity setting of the PLC parameter must
be set to 4000 steps or less.
Model name Media model name Applicable version Remarks
FX3S PLC
GX Works2
SW
DNC-GXW2-E
Ver. 1.492N or later
-
FX-30P Ver. 1.50 or later
FX3G PLC
GX Works2
SW
DNC-GXW2-E
Ver. 1.08J or later
-
GX Developer
SW
D5C-GPPW-E
Ver. 8.72A or later
FX-30P Ver. 1.00 or later
FX3GC PLC
GX Works2
SW
DNC-GXW2-E
Ver. 1.77F or later
-
FX-30P Ver. 1.30 or later
FX3U and FX3UC PLCs
GX Works2
SW
DNC-GXW2-E
Ver. 1.08J or later
-
GX Developer
SW
D5C-GPPW-E
Ver. 8.18U or later
FX-30P Ver. 1.00 or later
Model name Media model name Applicable version Remarks
FX3S PLC
GX Works2
SW
DNC-GXW2-J
Ver. 1.492N or later
-
FX-30P Ver. 1.50 or later
FX3G PLC
GX Works2
SW
DNC-GXW2-J
Ver. 1.07H or later
-
GX Developer
SW
D5C-GPPW-J
Ver. 8.72A or later
FX-30P Ver. 1.00 or later
FX3GC PLC
GX Works2
SW
DNC-GXW2-J
Ver. 1.77F or later
-
FX-30P Ver. 1.30 or later
FX3U and FX3UC PLCs
GX Works2
SW
DNC-GXW2-J
Ver. 1.07H or later
-
GX Developer
SW
D5C-GPPW-J
Ver. 8.13P or later
FX-30P Ver. 1.00 or later
To Next Page
Loading...
