Mitsubishi Electric MELSEC-FX3S Series - Page 50

A-24
3 System Configuration Drawings of Analog Products
3.5 FX3UC Series PLC
FX 3S /FX 3G /FX 3GC /FX 3U /FX 3UC PLC User's Manual - Analog Control Edition
Common Items
2. FX3UC-32MT-LT(-2) PLC
*1. An FX3U-232-BD, FX3U-485-BD, FX3U-422-BD, FX3U-USB-BD, FX3U-8AV-BD, or FX3U-CNV-BD is
needed to connect the special adapters.
RD
RDA
RDB
SDA
SDB
SG
SD
European terminal block
European terminal block
European terminal block
Up to 4 analog special adapters can be connected.
Analog input

Flowmeter
 Pressure sensor
 Signal converter, etc.
Analog input
 Flowmeter
 Pressure sensor
 Signal converter, etc.
Analog output
 Inverter, etc.
Analog output
 Inverter, etc.
B C
, , and represent the connecting positions.
(For a detailed description of installation, refer to the
FX
3UC Series User’s Manual - Hardware Edition.)
FX3U-***-BD
*1
B
A
FX3U-4AD-ADP
FX
3U -4DA-ADP
FX
3U -3A-ADP
A
A
A
C
To connect the special function blocks
D
refer to Subsection 3.5.2-2.
or the conversion adapters
,
A
B
C1
D
C2
European terminal block
A
FX 3U -4AD-TC-ADP
FX 3U -4AD-PNK-ADP
FX 3U -4AD-PT-ADP
FX 3U -4AD-PTW-ADP
Temperature sensor
input



Thermocouple
(types K and J)
Resistance
thermometer
sensor (Pt1000 and
Ni1000)
Platinum resistance
thermometer
sensor (Pt100)