Mitsubishi Electric Melservo-J5 MR-J5 Series - Page 214

212
6 OPTIONS AND PERIPHERAL EQUIPMENT
6.12 Power factor improving AC reactor
200 V class [G] [A]
*1 Use this for grounding.
*2 For FR-HAL-0.4K to FR-HAL-1.5K, the W dimension is "W ± 2".
*3 For 1-phase 200 V AC to 240 V AC power supply, connect the power supply to L1 and L3. Leave L2 open.
*4 Maximum dimensions. The dimensions vary depending on the curvature of the input/output lines.
Servo amplifier Power factor
improving
AC reactor
Dimensions [mm] Terminal
size
Mass [kg]
W W1 H D
*4
D1 D2 d
MR-J5-10_
MR-J5-20_
FR-HAL-0.4K 104 84 99 72 51 40 M5 M4 0.6
MR-J5-40_ FR-HAL-0.75K 104 84 99 74 56 44 M5 M4 0.8
MR-J5-60_
MR-J5-70_
FR-HAL-1.5K 104 84 99 77 61 50 M5 M4 1.1
MR-J5-100_
(3-phase power
supply input)
FR-HAL-2.2K 115
*4
40115777157M6M4 1.5
MR-J5-100_
(1-phase power
supply input)
MR-J5-200_
(3-phase power
supply input)
FR-HAL-3.7K 115
*4
40115838167M6M4 2.2
MR-J5-200_
(1-phase power
supply input)
FR-HAL-5.5K 115
*4
40115838167M6M4 2.3
RX ZSYT
W1
D1
D2
H
Y
Z
S
T
MCMCCB
FR-HAL
XR
L1
L2
L3
L1
L2
L3
Y
Z
S
T
MCMCCB
FR-HAL
XR
Servo amplifier
3-phase 200 V class
Terminal assignment
4-d mounting hole
(Varnish is removed only from bottom right
(face and back side))
*1
3-phase
200 V AC to 240 V AC
D or less
Servo amplifier
1-phase 200 V class
1-phase
*3
200 V AC to 240 V AC
W or less
*2