Mitsubishi 00JCPU User Manual

6 - 33
CHAPTER6 FUNCTIONS
1
2
3
4
5
6
7
8
6.7 Q Series-compatible Module Input Response Time Selection (I/O Response Time)
(3) Precautions
(a) Restrictions on GX Developer version
When changing the input response time of the following modules, use GX Developer shown below.
• High-speed input module: GX Developer Version 5 (SW5D5C-GPPW-E) or later
• Interrupt module: GX Developer Version 6 (SW6D5C-GPPW-E) or later
When GX Developer version earlier than the version above is used, a default time value is used.
(b) When input response time is shortened
The shorter the input response time is, the more the CPU module is susceptible to noise.
Consider the operating environment when setting input response time values.
(c) When an AnS/A series-compatible module is used
An input response time value cannot be changed.
If any input response time value is set for the slot where an AnS/A series-compatible input module or interrupt
module is mounted, the setting is ignored.
(d) Enabling the setting
The input response time setting will be enabled when:
• the CPU module is powered off and then on, or
• the CPU module is reset.

Mitsubishi 00JCPU Specifications

General

Brand	Mitsubishi
Model	00JCPU
Category	Controller
Language	English