Mitsubishi 00JCPU

APPX - 11
Appendix 2.4 Upgrade of the Redundant CPU
(1) Availability of new functions depending on the versions of the CPU module
and GX Developer
-: Not related to GX Developer
TableAPPX.8 Availability of new functions depending on the versions of the CPU module and GX Developer
Function
Function
version
First 5 digits of
serial No.
GX Developer
Reading of the SFC active step comment ( MELSEC-Q/L/QnA
Programming Manual (SFC))
D
"07032"
or later
-
Clock data in units of 1/1000 seconds ( Section 6.5)
Storage of sampling trace files in standard RAM ( Section 6.14)
Version 8.23Z
or later
Selection of execution of the fall instruction during online change (
Section 6.12.3)
"07092"
or later
Version 8.27D
or later
Use of extension base units ( QnPRHCPU User's Manual (Redundant
System))
"09012"
or later
Version 8.45X
or later
CC-Link parameter setting of up to 8 modules ( CC-Link System
Master/Local Module User's Manual)
"09102"
or later
Version 8.58L
or later
Communication with CC-Link IE Controller Network ( CC-Link IE
Controller Network Reference Manual)
"10042"
or later
Version 8.68W
or later
Support of 4M-byte SRAM card ( QCPU User's Manual (Hardware
Design, Maintenance and Inspection))
"16021"
or later
-