Mitsubishi 00JCPU User Manual

1
2
3
A
6
7
8
Appendix 2 Upgrade by Function Addition Appendix 2.3 Upgrade of the Process CPU
APPENDICES
APPX - 10
Appendix 2.3 Upgrade of the Process CPU
(1) Availability of new functions depending on the versions of the CPU module
and GX Developer
-: Not related to GX Developer
TableAPPX.7 Availability of new functions depending on the versions of the CPU module and GX Developer
Function
Function
version
First 5 digits of
serial No.
GX Developer
Index modification with a device specifying an intelligent function module
( Manual for the intelligent function module that can use dedicated
instructions)
C
"07032"
or later
-
Refresh item selection for the COM instruction ( MELSEC-Q/L
Programming Manual (Common Instruction))
Online change (files) of SFC program ( Section 6.12.2)
Version 8
(Version 8.22Y or
earlier)
File size unit ( Section 5.4.4)
Use of CC-Link remote net additional mode ( CC-Link System Master/
Local Module User's Manual)
Memory check function ( Section 6.26)
Version 8.23Z
or later
Reading of the SFC active step comment ( MELSEC-Q/L/QnA
Programming Manual (SFC))
-
Detection of errors in the redundant power supply system ( Section
6.20)
Version 8.23Z
or later
Clock data in units of 1/1000 seconds
( Section 6.5)
-
Storage of sampling trace files in standard RAM
( Section 6.14)
Version 8.23Z
or later
Individual settings of refresh devices in multiple CPU systems ( QCPU
User's Manual (Multiple CPU System))
Selection of execution of the fall instruction during online change (
Section 6.12.3)
"07092"
or later
Version 8.27D
or later
"Block data assurance per station" setting for CC-Link ( CC-Link
System Master/Local Module User's Manual)
"08032"
or later
Version 8.32J
or later
CC-Link parameter setting of up to 8 modules ( CC-Link System
Master/Local Module User's Manual)
Communication with CC-Link IE Controller Network ( CC-Link IE
Controller Network Reference Manual)
"10042"
or later
Version 8.68W
or later
Support of 4M-byte SRAM card ( QCPU User's Manual (Hardware
Design, Maintenance and Inspection))
"16021"
or later
-

Mitsubishi 00JCPU Specifications

General

Brand	Mitsubishi
Model	00JCPU
Category	Controller
Language	English