7 - 9
(3) Precautions
(a) When the CPU module is set from RUN to STOP before the completion device turns
on
When a intelligent function module dedicated instruction is executed and the CPU module is set from RUN to
STOP before the completion device turns on, the completion device will not turn on until the CPU module is set
to RUN and then finishes one scan.
(b) Available range
The intelligent function module dedicated instructions are not applicable to the intelligent function modules
mounted on remote I/O stations of MELSECNET/H.
The instructions are applicable to the intelligent function modules mounted on the base unit or extension base
units.
For intelligent function module dedicated instructions and completion devices, refer to the following.
Manual for the intelligent function module used
To Next Page
Loading...
Need help?
General
