Mitsubishi 00JCPU User Manual

8 - 16
CHAPTER8 PARAMETERS
1
2
3
4
5
6
7
8
8.1 PLC Parameters 8.1.2 High Performance model QCPU, Process CPU, and Redundant CPU
(3) PLC file
Parameters required for the files used in the CPU module are set.
Figure 8.14 PLC file
Table8.14 PLC file setting list
Item
Parameter
No.
Description Setting range Default Reference
File register 1100
H
Set a file for the file register used in
the program.
• Not used
• Use the same file name as
the program.
• Use the following file.
Not used Section 9.7
Comment file used in a command 1101
H
Set a file for device comments used
in the program.
• Not used
• Use the same file name as
the program.
• Use the following file.
Not used -
Initial Device value 1102
H
Set a file for initial values of the
devices used for the CPU module.
• Not used
• Use the same file name as
the program.
• Use the following file.
Not used Section 6.26
File for local device 1103
H
Set a file for local devices used in the
program.
• Not used
• Use the following file.
Not used Section 9.13.2

Mitsubishi 00JCPU Specifications

General

Brand	Mitsubishi
Model	00JCPU
Category	Controller
Language	English