Mitsubishi FX3U-422-BD - Applicable FX PLC and Communication Equipment

C-18
FX Series PLC User's Manual - Data Communication Edition
Parallel Link
3 System Configuration and Selection
3.3 Applicable FX PLC and Communication Equipment
3.3 Applicable FX PLC and Communication Equipment
Select a (optional) communication equipment combination, and put a check mark in the "Check" column.
During selection, pay attention to the following:
- In the table below, only the external dimensions are different between the units shown in "FX
2NC-
485ADP/FX
0N-485ADP". Select either one.
- The parallel link is not provided for the FX
0, FX0S and FX1 Series.
FX Series Communication equipment (option)
Total extension
distance
Check
FX
0N
500 m
(1640' 5")
FX
1S
50 m
(164' 0")
500 m
(1640' 5")
FX
1N
50 m
(164' 0")
500 m
(1640' 5")
FX2N
50 m
(164' 0")
500 m
(1640' 5")
FX 2NC -485ADP
(European terminal block)
FX 0N -485ADP
(Terminal block)
FX 1N -485-BD
(European terminal block)
FX 1N -CNV-BD
+
FX 2NC -485ADP
(European terminal block)
FX 0N -485ADP
(Terminal block)
FX 1N -CNV-BD
+
FX 1N -485-BD
(European terminal block)
FX 1N -CNV-BD
+
FX 2NC -485ADP
(European terminal block)
FX 0N -485ADP
(Terminal block)
FX 1N -CNV-BD
+
FX 2N -485-BD
FX 2N -CNV-BD
+
FX 2NC -485ADP
(European terminal block)
FX 0N -485ADP
(Terminal block)
FX 2N -CNV-BD
+