Mitsubishi FX3U-422-BD - Registering Line Connection Destination

I-41
FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
6 How to Setup Modems on the PC Side for Remote Access
6.2 Setting Using FXGP/WIN
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter Communication
F
Non-Protocol Communication (RS/RS2 Instruction)
G
Non-Protocol Communication (FX
2N
-232IF)
H
Programming Communication
I
Remote Maintenance
Apx.
Discontinued models
6.2.2 Registering line connection destination
This subsection explains how to register the telephone number of the line connection destination (line
connected to the modem of the desired PLC).
1 Displaying the line connection dialog box
Select [Remote] - [Connect] - [to PLC] from the toolbar to display the following dialog box.
2 Inputting the telephone number of the line connection destination
Click the [New Entry] button.
When the following dialog box appears, input the counterpart name and telephone number.
3 Registering the line connection destination
After inputting the telephone number, click the [OK] button to register it.
→ For details on set items, refer to the manual of FXGP/WIN.