Mitsubishi FX3U-422-BD - For Non-Applicable Versions (Setting an Alternative Model)

F-10
FX Series PLC User's Manual - Data Communication Edition
Non-Protocol Communication (RS/RS2 Instruction)
1 Outline
1.4 Programming Tool Applicability
1.4.2 For non-applicable versions (setting an alternative model)
Even software not applicable to a PLC can create programs when an alternative model is set.
In this case, however, programming is enabled only in the ranges provided for the alternative PLC model
such as instructions and program size.
*1. "FX
2N" is selected when the FX-10P is used.
GOT-F900 Series display
units
F940WGOT-TWD-E
F940GOT-*WD-E
F940GOT-*BD-H-E
F940GOT-*BD-RH-E

(Refer to right column)
F940WGOT-TWD-E (Ver. 1.00 or later)
F940GOT-LWD-E, F940GOT-SWD-E (Ver. 1.00 or later)
F940GOT-LBD-H-E, F940GOT-SBD-H-E (Ver. 1.00 or later)
F940GOT-LBD-RH-E, F940GOT-SBD-RH-E (Ver. 1.00 or later)
Model to be programmed Model to be set Priority: High → Low
FX
3UC Series FX3UC → FX2N → FX2(FX)
FX
3U Series FX3U, FX3UC → FX2N → FX2(FX)
FX
3G Series FX3G →
FX
1N
*1
→
FX
2N
*1
FX2NC Series FX2NC, FX2N → FX2(FX)
FX
2N Series FX2N → FX2(FX)
FX
1NC Series FX1NC, FX1N → FX2N → FX2(FX)
FX
1N Series FX1N → FX2N → FX2(FX)
FX
1S Series FX1S → FX2(FX)
FX
0N Series FX0N → FX2(FX)
FX
0S Series FX0S → FX2(FX)
FX
0 Series FX0 → FX2(FX)
FX
2C Series FX2C, FX2(FX) → FX2(FX)
FX
2(FX) Series FX2(FX)
FX
1 Series FX1
Model name
(Software name)
Applicability
(applicable version)
Remarks