Mitsubishi FX3U-422-BD - Cautions on Using FXGP;WIN

I-11
FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
1 Outline
1.4 Programming Tool Applicability
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter Communication
F
Non-Protocol Communication (RS/RS2 Instruction)
G
Non-Protocol Communication (FX
2N
-232IF)
H
Programming Communication
I
Remote Maintenance
Apx.
Discontinued models
3. In the case of non-applicable versions
A non-applicable programming software version cannot offer remote maintenance.
If your programming software is a non-applicable version, upgrade versions.
To upgrade versions, contact your dealer.
1.4.3 Cautions on using FXGP/WIN
1. When FXGP/WIN is used in the following Windows environment, remote maintenance
cannot be used:
- Windows NT4.0
- Windows 2000
- Windows XP
2. For FX3U and FX3UC Series
The models "FX3U" and "FX3UC" cannot be selected.
"FX
2N" can be selected and set as the alternative model.
However, FXGP/WIN cannot be connected to a PLC in which the PP modem mode is set.
3. For FX3G Series
The models "FX3G" cannot be selected.
"FX
1N" can be selected and set as the alternative model.
However, FXGP/WIN cannot be connected to a PLC in which the PP modem mode is set.